漆膜磨耗仪工作原理
2019-06-17 17:44:18 来源：荣计达
工作原理：
严格的控制保证可靠的结果 精心挑选的磨耗轮磨料，质量高 加在磨擦轮上的压力以克为单位 磨耗轮稳定性经严格的质量控制 电子测量转盘转动数 真空吸尘器除磨屑。
漆膜磨耗仪是由二个磨耗砂轮配置于转盘上，当转盘旋转时，左侧一个磨耗砂轮由外向样板表面中心磨擦，而右侧一个磨耗砂轮由样板表面中心向外磨擦。当转盘旋转一周时，在样板表面磨耗的痕迹是由互相重合，并呈X形相交的二园环组成。采用这种方式，其优点是使样板表面各个方向都受到磨擦，克服了一个方向往复运动的耐磨仪的缺点。
Fourth, the working principle:
Strict control guarantees reliable results Carefully selected grinding wheel abrasives, high quality Plus pressure on the grinding wheel in grams of wear wheel stability through strict quality control Electronic measuring turntable rotation number Vacuum cleaner in addition to wear debris.
The paint film abrasion device is arranged on the turntable by two wear grinding wheels. When the turntable rotates, one wear wheel on the left side is rubbed from the center of the surface of the outward sample, and one wear wheel on the right side is rubbed outward from the center of the surface of the sample plate. When the turntable rotates for one round, the traces worn on the surface of the template are composed of two circular rings that coincide with each other and intersect in an X shape. In this way, the advantage is that the surface of the template is rubbed in all directions, overcoming the shortcomings of the reciprocating wearer in one direction.
五;注意事项：
⑴ 测试结束后，应切断电源，清理仪器，将仪器罩好。
⑵ 长期不用时，应将砂轮取下放好。
⑶ 一年至二年必须检修加油一次
Five; Note:
(1) After the test is finished, the power should be turned off, the instrument should be cleaned, and the instrument should be covered.
(2) When not in use for a long time, the grinding wheel should be removed and placed.
(3) One year to two years must be repaired once
扫一扫，手机浏览
上海荣计达仪器科技有限公司
